ABS J-1200/20
0
- Properties:Good dimensional stability
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.23 g/cm | |
| Shrinkage rate | ASTM D-955 | 0.30 % | |
| ASTM D-955 | 0.30 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D-790 | 110 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 80.1 J/m | |
| elongation at break | ASTM D-638 | 2.0 % | |
| Flexural modulus | ASTM D-790 | 5860 MPa | |
| Rockwell hardness | ASTM D-785 | 75 M scale | |
| Tensile modulus | ASTM D-638 | 6210 MPa | |
| tensile strength | ASTM D-638 | 82.7 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 98.9 ℃ | |
| combustibility | UL 94 | HB | |
| UL 94 | HB | ||
| UL 94 | HB | ||
| RTI Str | UL 746 | 60.0 ℃ | |
| UL 746 | 60.0 ℃ | ||
| UL 746 | 60.0 ℃ | ||
| Heat distortion temperature | ASTM D-648 | 107 ℃ | |
| RTI Imp | UL 746 | 60.0 ℃ | |
| UL 746 | 60.0 ℃ | ||
| UL 746 | 60.0 ℃ | ||
| RTI Elec | UL 746 | 60.0 ℃ | |
| UL 746 | 60.0 ℃ | ||
| UL 746 | 60.0 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top