Ionomer FORMION® FI 200HFU
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792A | 1.04 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 16 g/10min | |
| Shrinkage rate | ASTM D955 | 0.80to1.0 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 95 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 45.0 MPa | |
| Tensile strain | ASTM D638 | 250 % | |
| Flexural modulus | ASTM D790A | 1000 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256A | NoBreak | |
| Multi-AxialInstrumentedImpactEnergy | ISO 6603-2 | 45.0 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648A | 65.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top