GPPS WD-500E
22
- Properties:High mobilitytransparent
- Usages:PS boardThin walled components
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ISO 527 | 46 Mpa |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.05 g/m | |
| melt mass-flow rate | ISO 1133 | 4.5-5.5 CM | |
| Water absorption rate | ISO 62 | 〈0.1 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt Temperature | 200-240 °C | ||
| Shrinkage rate | 0.3-0.6 % | ||
| Injection molding melt temperature | 180-260 °C | ||
| Injection mold temperature | 10-60 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 10 KJ/m | ||
| elongation at break | ISO 527 | 2 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306 | 91 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top