Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
GPPS WD-500E WUXI WEIDA
--
PS board、Thin walled components
High mobility、transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | WUXI WEIDA/WD-500E |
|---|---|---|---|
| Injection molding melt temperature | 180-260 °C | ||
| Melt Temperature | 200-240 °C | ||
| Shrinkage rate | 0.3-0.6 % | ||
| Injection mold temperature | 10-60 °C |
| Basic performance | Test Condition | Test Method | WUXI WEIDA/WD-500E |
|---|---|---|---|
| Water absorption rate | ISO 62 | 〈0.1 % | |
| density | ISO 1183 | 1.05 g/m | |
| melt mass-flow rate | ISO 1133 | 4.5-5.5 CM |
| Mechanical properties | Test Condition | Test Method | WUXI WEIDA/WD-500E |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO180 | 10 KJ/m | |
| elongation at break | ISO 527 | 2 % |
| physical property | Test Condition | Test Method | WUXI WEIDA/WD-500E |
|---|---|---|---|
| Tensile stress | ISO 527 | 46 Mpa |
| Thermal performance | Test Condition | Test Method | WUXI WEIDA/WD-500E |
|---|---|---|---|
| vicat | ISO 306 | 91 °C |
Contact Us
Get App
Top