Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.30 g/cm³ |
| Water absorption rate | Equilibrium | ASTM D570 | 6.5 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 25 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Initial weightlessness temperature | | 内部方法 | 499 °C |
| Initial weightlessness temperature | | 内部方法 | 499 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 5030 MPa |
| tensile strength | | ASTM D638 | 100 MPa |
| elongation | Break | ASTM D638 | 2.2 % |
| Flexural modulus | | ASTM D790 | 5000 MPa |
| bending strength | | ASTM D790 | 175 MPa |
| Compression Modulus | | ASTM D695 | 2960 MPa |
| compressive strength | | ASTM D695 | 207 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 2E+16 ohms·cm |
| dielectric strength | | ASTM D149 | 17 kV/mm |
| dielectric constant | | ASTM D150 | 3.40 |
| dielectric constant | | ASTM D150 | 3.40 |
| Dissipation Factor | | ASTM D150 | 0.0 |
| Dissipation Factor | | ASTM D150 | 1E-03 |
| arc resistance | | ASTM D495 | 135 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | TMA | 3.4E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | TMA | 7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare