Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBI (T Series) TU-60 PBI USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | PBI USA/(T Series) TU-60 |
|---|---|---|---|
| Initial weightlessness temperature | Nitrogen | 内部方法 | 499 °C |
| Air | 内部方法 | 499 °C |
| hardness | Test Condition | Test Method | PBI USA/(T Series) TU-60 |
|---|---|---|---|
| Rockwell hardness | A计秤 | ASTM D785 | 25 |
| Mechanical properties | Test Condition | Test Method | PBI USA/(T Series) TU-60 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.2 % |
| tensile strength | ASTM D638 | 100 MPa | |
| compressive strength | ASTM D695 | 207 MPa | |
| Tensile modulus | ASTM D638 | 5030 MPa | |
| Flexural modulus | ASTM D790 | 5000 MPa | |
| Compression Modulus | ASTM D695 | 2960 MPa | |
| bending strength | ASTM D790 | 175 MPa |
| Electrical performance | Test Condition | Test Method | PBI USA/(T Series) TU-60 |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 0.0 |
| dielectric constant | 10kHz | ASTM D150 | 3.40 |
| Volume resistivity | ASTM D257 | 2E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 17 kV/mm | |
| dielectric constant | 1kHz | ASTM D150 | 3.40 |
| Dissipation Factor | 10kHz | ASTM D150 | 1E-03 |
| arc resistance | ASTM D495 | 135 sec |
| physical property | Test Condition | Test Method | PBI USA/(T Series) TU-60 |
|---|---|---|---|
| density | 1.30 g/cm³ | ||
| Water absorption rate | 平衡 | ASTM D570 | 6.5 % |
| Thermal performance | Test Condition | Test Method | PBI USA/(T Series) TU-60 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：24到149°C | TMA | 3.4E-05 cm/cm/°C |
| MD：199到299°C | TMA | 7E-05 cm/cm/°C |
Contact Us
Get App
Top