PC Makrolon® 9417C 012124
32
- Properties:Flame retardanttransparentFiller: Glass fiber reinf10% filler by weight10% filler by weight
- Usages:Automotive components
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO294-4 | 0.45 % | |
| ISO2577 | 0.40to0.60 % | ||
| ISO2577 | 0.40to0.60 % | ||
| melt mass-flow rate | ISO1133 | 7.0 g/10min | |
| Melt volume flow rate | ISO1133 | 6.00 cm3/10min | |
| Water absorption rate | ISO62 | 0.10 % | |
| density | ISO1183 | 1.27 g/cm³ | |
| Apparent density 2 | ISO60 | 0.64 g/cm³ | |
| Shrinkage rate | ISO294-4 | 0.60 % | |
| Water absorption rate | ISO62 | 0.26 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO2039-1 | 128 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot filament ignition temperature | IEC60695-2-13 | 825 °C | |
| IEC60695-2-13 | 900 °C | ||
| IEC60695-2-13 | 900 °C | ||
| Extreme Oxygen Index 9 | ISO4589-2 | 35 % | |
| ISO3795 | passed | ||
| ApplicationofFlamefromSmallBurner-Method | DIN53438-1,-3 | K1,F1 | |
| FlashIgnitionTemperature | ASTMD1929 | 470 °C | |
| SelfIgnitionTemperature | ASTMD1929 | 550 °C | |
| Burning wire flammability index | IEC60695-2-12 | 960 °C | |
| IEC60695-2-12 | 960 °C | ||
| IEC60695-2-12 | 960 °C | ||
| UL flame retardant rating | UL94 | 5VA | |
| UL94 | 5VA | ||
| UL94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ElectrolyticalCorrosion | IEC60426 | A1 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179/1eU | 120 kJ/m² | |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 15.0 J | |
| NotchedIzodImpactStrength7 | ISO7391 | 10 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179/1eU | 150 kJ/m² | |
| ISO179/1eU | 100 kJ/m² | ||
| CharpyNotchedImpactStrength6 | ISO7391 | 10 kJ/m² | |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 25.0 J | |
| Multi axis Instrumented Peak Impact Force | ISO6603-2 | 4000 N | |
| ISO6603-2 | 3700 N |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO178 | 5.8 % | ||
| Bending stress | ISO178 | 105 Mpa | |
| ISO178 | 95.0 Mpa | ||
| Flexural modulus | ISO178 | 3600 Mpa | |
| Tensile modulus | ISO527-2/1 | 3800 Mpa | |
| Tensile stress | ISO527-2/5 | 64.0 Mpa | |
| ISO527-2/5 | 45.0 Mpa | ||
| Tensile strain | ISO527-2/5 | 4.6 % | |
| ISO527-2/5 | 15 % | ||
| Tensile creep modulus | ISO899-1 | 2900 Mpa | |
| TensileCreepModule | ISO899-1 | 3600 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| IEC60250 | 3.20 | ||
| IEC60250 | 3.20 | ||
| dielectric strength | IEC60243-1 | 36 KV/mm | |
| Volume resistivity | IEC60093 | 1E+16 ohms·cm | |
| Surface Resistivity | IEC60093 | 1E+16 ohms | |
| CTI | IEC60112 | 125 V | |
| IEC60112 | 175 V | ||
| Dissipation Factor | IEC60250 | 1E-03 | |
| IEC60250 | 9E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO11359-2 | 6.5E-05 cm/cm/°C | ||
| RTI Str | UL746 | 125 °C | |
| RTI Imp | UL746 | 115 °C | |
| Thermal conductivity coefficient 8 | ISO8302 | 0.22 W/m/K | |
| RTI Elec | UL746 | 125 °C | |
| ISO75-2/B | 141 °C | ||
| vicat | ISO306/B50 | 143 °C | |
| ISO306/B120 | 144 °C | ||
| BallPressure Test | IEC60695-10-2 | Pass | |
| ISO75-2/A | 135 °C | ||
| ISO11359-2 | 4E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top