Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D-955 | 0.4(0.8) % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTM D-570 | 0.3(3.0) % |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| Glass Fiber Content | | | 30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D-256 | 70(80) J/m |
| Flexural modulus | | ASTM D-790 | 12000(8500) Mpa |
| tensile strength | | ASTM D-638 | 170(140) Mpa |
| Rockwell hardness | | ASTM D-785 | 110 M Scale |
| elongation | | ASTM D-638 | 3(3) % |
| bending strength | | ASTM D-790 | 260(220) Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTM D-150 | 0.012 |
| Volume resistivity | | ASTM D-257 | 10 Ω.cm |
| dielectric strength | | ASTM D-149 | 20 KV/mm |
| dielectric constant | | ASTM D-150 | 3.9 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Glass transition temperature (Tg) | | | 85 °C |
| UL flame retardant rating | | UL 94 | V-0 |
| Linear coefficient of thermal expansion | | ASTM D-696 | 2.4(5.0) |
| Heat distortion temperature | | ASTM D-648 | 295 °C |
| melting temperature | | | 310 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices