PEEK 1330
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.37 g/cm³ | |
| Water absorption rate | ASTMD570 | 0.35 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 85 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| compressive strength | ASTMD695 | 107 MPa | |
| shear strength | ASTMD732 | 77.6 MPa | |
| ASTMD732 | 19.8 MPa | ||
| ASTMD1894 | 0.15 | ||
| Wear factor | ASTMD3702 | 40 10^-8mm³/N·m | |
| tensile strength | Break | ASTMD638 | 86.9 MPa |
| elongation | Break | ASTMD638 | 20 % |
| Flexural modulus | ASTMD790 | 3690 MPa | |
| bending strength | ASTMD790 | 145 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 57 J/m | |
| Suspended wall beam without notch impact strength | ASTMD256 | 1000 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 166 °C | ||
| melting temperature | 343 °C | ||
| ASTMD696 | 4.1E-05 cm/cm/°C | ||
| ASTMD696 | 1.5E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top