Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK 1330 Arlon-MED
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Arlon-MED/1330 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 1000 J/m | |
| Impact strength of cantilever beam gap | ASTM D256 | 57 J/m |
| hardness | Test Condition | Test Method | Arlon-MED/1330 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 85 |
| Mechanical properties | Test Condition | Test Method | Arlon-MED/1330 |
|---|---|---|---|
| shear strength | 232°C | ASTM D732 | 19.8 MPa |
| elongation | 断裂 | ASTM D638 | 20 % |
| compressive strength | ASTM D695 | 107 MPa | |
| coefficient of friction | ASTM D1894 | 0.15 | |
| tensile strength | 断裂 | ASTM D638 | 86.9 MPa |
| Flexural modulus | ASTM D790 | 3690 MPa | |
| bending strength | ASTM D790 | 145 MPa | |
| Wear factor | ASTM D3702 | 40 10^-8mm³/N·m | |
| shear strength | 23°C | ASTM D732 | 77.6 MPa |
| physical property | Test Condition | Test Method | Arlon-MED/1330 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.35 % |
| density | ASTM D792 | 1.37 g/cm³ |
| Thermal performance | Test Condition | Test Method | Arlon-MED/1330 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 166 °C |
| Linear coefficient of thermal expansion | MD：>149°C | ASTM D696 | 1.5E-04 cm/cm/°C |
| MD：<149°C | ASTM D696 | 4.1E-05 cm/cm/°C | |
| melting temperature | 343 °C |
Contact Us
Get App
Top