PA6 Padermid 6 GF30 N

Properties:
Filler
glass fiber reinforced material
30%
filler by weight
Usages:
Applications in electrical
electronic applications
casings
automotive fields
gears
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO1183	1.33 g/cm³
Shrinkage rate	STN640808.00	0.45 %
Water absorption rate	DI53495	1.8 %

Mechanical properties	Test Method	Test Result
Impact strength of simply supported beam without notch	ISO179/1eU	65 kJ/m²
tensile strength	ISO527-2	170 MPa
elongation at break	ISO527-2	3 %
Tensile modulus	ISO527-2	8900 MPa
bending strength	ISO178	200 MPa
Flexural modulus	ISO178	7600 MPa
Charpy Notched Impact Strength	ISO179/1eA	12 kJ/m²

Flame retardant performance	Test Condition	Test Method	Test Result
fire rating		UL-94	. HB
Relative temperature of heating wire		IEC60695-2-13	650 °C

Electrical performance	Test Method	Test Result
	IEC60093	5E+13 Ω.cm
Surface Resistivity	IEC60093	8E+13 Ω.cm
Dielectric Strength	IEC60243-1	20 KV/mm
Dissipation Factor	STN346468.00	575 V

Thermal performance	Test Condition	Test Method	Test Result
vicat		ISO306/B50	210 °C
linear expansion coefficient	Melting Temperature	ISO3146	220 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top