Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 0.980to1.02 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | >14 g/10min |
| Shrinkage rate | | | <1.1 % |
| LightFastness | | SAEJ1885 | 2 month |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| HeatResistance-ElevatedTemp | | | Nochangeinshapeorsurface |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTM D638 | >19.0 MPa |
| Flexural modulus | | ASTM D790 | >1500 MPa |
| scratch resistance | | 内部方法 | <2.00 dL |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | >120 J/m |
| aging | Test Condition | Test Method | Test Result |
|---|
| thermal ageing | | | NodecompositiontypicalofPP |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | >130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare