Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.29 g/cm³ |
| Water absorption rate | | ASTM D570 | 0.37 % |
| Water absorption rate | | ASTM D570 | 1.1 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 123 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 91.0 MPa |
| compressive strength | | ASTM D695 | 98.9 MPa |
| Tensile modulus | | ASTM D638 | 2340 MPa |
| tensile strength | | ASTM D638 | 69.6 MPa |
| elongation | | ASTM D638 | 60 % |
| Flexural modulus | | ASTM D790 | 2410 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTM D256 | 690 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTM D150 | 3.44 |
| Volume resistivity | | ASTM D257 | 1E+15 ohms·cm |
| dielectric strength | | ASTM D149 | 14 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 214 °C |
| Heat distortion temperature | | ASTM D648 | 207 °C |
| Heat distortion temperature | | ASTM D648 | 218 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 5.6E-05 cm/cm/°C |
| specific heat | | ASTMC351 | 1130 J/kg/°C |
| maximum service temperature | | | 182 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare