Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPSU TECASON™ P MT ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ P MT |
|---|---|---|---|
| Rockwell hardness | R-Scale,23°C | ASTM D785 | 123 |
| thermal performance | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ P MT |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 207 °C |
| 维卡软化温度 | ASTM D648 | 218 °C | |
| 0.45MPa,Unannealed | ASTM D648 | 214 °C | |
| Linear coefficient of thermal expansion | MD:-40to38°C | ASTM D696 | 5.6E-05 cm/cm/°C |
| Maximum operating temperature | 间歇 | 182 °C | |
| specific heat | ASTMC351 | 1130 J/kg/°C |
| mechanical properties | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ P MT |
|---|---|---|---|
| Bending modulus | 23°C | ASTM D790 | 2410 MPa |
| bending strength | 23°C | ASTM D790 | 91.0 MPa |
| compressive strength | ASTM D695 | 98.9 MPa | |
| elongation | Break,23°C | ASTM D638 | 60 % |
| Tensile modulus | ASTM D638 | 2340 MPa | |
| tensile strength | Yield,23°C | ASTM D638 | 69.6 MPa |
| Electrical performance | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ P MT |
|---|---|---|---|
| Dielectric constant | 23°C,60Hz | ASTM D150 | 3.44 |
| Dielectric strength | ASTM D149 | 14 kV/mm | |
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ P MT |
|---|---|---|---|
| density | ASTM D792 | 1.29 g/cm³ | |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.37 % |
| Saturation,23°C | ASTM D570 | 1.1 % |
| impact performance | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ P MT |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 690 J/m |
| flammability | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ P MT |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |