ABS+PMMA Novodur® HG-36

Usages:
Construction applications
household goods
cosmetics
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO 1183	1.12 g/cm³
Melt volume flow rate	ISO 1133	16.0 cm³/10min
Shrinkage rate	ISO 294-4	0.50to0.60 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	2600 MPa
tensile strength		ISO 527-2	48.0 MPa
Nominal tensile fracture strain		ISO 527-2	10 %
Rockwell hardness	R-Scale	ISO 2039-2	115

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179	3.0 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO 179	5.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179	26 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179	60 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		IEC 60093	>1.0E+18 ohms·cm
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 0

Thermal performance	Test Condition	Test Method	Test Result
vicat		ISO 306/A50	100 °C
vicat	vicat		ISO 306/B50	92.0 °C
Linear coefficient of thermal expansion		ISO 11359-2	8.0E-5to1.1E-4 cm/cm/°C
thermal conductivity		DIN 52612	0.17 W/m/K

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top