Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS+PMMA Novodur® HG-36 INEOS Barex
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | INEOS Barex/Novodur® HG-36 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 5.0 kJ/m² |
| -30°C | ISO 179 | 3.0 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179 | 26 kJ/m² |
| 23°C | ISO 179 | 60 kJ/m² |
| Mechanical properties | Test Condition | Test Method | INEOS Barex/Novodur® HG-36 |
|---|---|---|---|
| tensile strength | 屈服,23°C | ISO 527-2 | 48.0 MPa |
| Tensile modulus | ISO 527-2 | 2600 MPa | |
| Nominal tensile fracture strain | 23°C | ISO 527-2 | 10 % |
| Rockwell hardness | R级 | ISO 2039-2 | 115 |
| Electrical performance | Test Condition | Test Method | INEOS Barex/Novodur® HG-36 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Volume resistivity | IEC 60093 | >1.0E+18 ohms·cm |
| physical property | Test Condition | Test Method | INEOS Barex/Novodur® HG-36 |
|---|---|---|---|
| Melt volume flow rate | 220°C/10.0kg | ISO 1133 | 16.0 cm³/10min |
| Shrinkage rate | ISO 294-4 | 0.50to0.60 % | |
| density | ISO 1183 | 1.12 g/cm³ |
| Thermal performance | Test Condition | Test Method | INEOS Barex/Novodur® HG-36 |
|---|---|---|---|
| thermal conductivity | DIN 52612 | 0.17 W/m/K | |
| vicat | -- | ISO 306/A50 | 100 °C |
| -- | ISO 306/B50 | 92.0 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 8.0E-5to1.1E-4 cm/cm/°C |
Contact Us
Get App
Top