Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | 内部方法 | 1.36 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ISO 868 | 76 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ISO 178 | 3600 MPa |
| bending strength | | ISO 178 | 72.0 MPa |
| Tensile modulus | | ISO 527-2 | 3800 MPa |
| tensile strength | | ISO 527-2 | 48.0 MPa |
| Tensile strain | Break | ISO 527-2 | 4.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 4.6 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 29 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | 5E+14 ohms |
| Volume resistivity | | IEC 60093 | 3E+14 ohms·cm |
| dielectric strength | | IEC 60243-1 | 0.10 kV/mm |
| relative permittivity | | IEC 60250 | 13.0 |
| relative permittivity | | IEC 60250 | 10.0 |
| Dissipation Factor | | IEC 60250 | 0.018 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/A | 144 °C |
| vicat | | ISO 306/B50 | 169 °C |
| melting temperature | | ISO 11357 | 176 °C |
| Heat distortion temperature | | ISO 75-2/B | 175 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare