Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 EOS Alumide EOS GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EOS GmbH/EOS Alumide |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 4.6 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 29 kJ/m² |
| hardness | Test Condition | Test Method | EOS GmbH/EOS Alumide |
|---|---|---|---|
| Shore hardness | 邵氏D,15秒 | ISO 868 | 76 |
| Electrical performance | Test Condition | Test Method | EOS GmbH/EOS Alumide |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 0.10 kV/mm | |
| Volume resistivity | IEC 60093 | 3E+14 ohms·cm | |
| relative permittivity | 100Hz | IEC 60250 | 13.0 |
| 1MHz | IEC 60250 | 10.0 | |
| Surface Resistivity | IEC 60093 | 5E+14 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.018 |
| Mechanical properties | Test Condition | Test Method | EOS GmbH/EOS Alumide |
|---|---|---|---|
| Flexural modulus | 23°C | ISO 178 | 3600 MPa |
| tensile strength | ISO 527-2 | 48.0 MPa | |
| Tensile modulus | ISO 527-2 | 3800 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | 4.0 % |
| bending strength | ISO 178 | 72.0 MPa |
| physical property | Test Condition | Test Method | EOS GmbH/EOS Alumide |
|---|---|---|---|
| density | 内部方法 | 1.36 g/cm³ |
| Thermal performance | Test Condition | Test Method | EOS GmbH/EOS Alumide |
|---|---|---|---|
| melting temperature | ISO 11357 | 176 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 175 °C |
| vicat | ISO 306/B50 | 169 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 144 °C |
Contact Us
Get App
Top