POE EXACT™ 8201
42
- Properties:Low temperature resistancHigh temperature resistanwear resistantWeather resistance
- Usages:Automotive sectorfilmPackaging film
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256 | No Break J/m | |
Flexural modulus | ISO 178 | 30 Mpa | |
elongation at break | ISO 527-2 | 1750 % | |
tensile strength | ISO 527-2 | 24 Mpa | |
Environmental stress cracking resistance | ASTM D-1693 | >1000 hr |
Basic performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Maximum melt temperature | ASTM D3418 | 70 °C | |
Shore hardness | ISO 868 | 29 | |
ISO 868 | 85 | ||
heat of fusion | ASTM D3418 | 105 J/g | |
density | ISO 1183 | 882 kg/cm | |
vicat | ISO 306 | 55 °C | |
melt mass-flow rate | ISO 1133 | 1.1 dg/min |
Other performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Mooney viscosity ML (1+4) | ASTM D-1646 | 16.5 Torgue Units | |
Impact strength of cantilever beam gap | ASTM D4272 | >18 g/u | |
Haze ratio | ASTM D1003(A) | 2.2 % | |
Breakdown voltage strength | 内部方法 | 1500 MJ/mm | |
Flexural modulus | ISO 1184(F) | 24/25 Mpa | |
Guan Zedu | ASTM 2457 | 84 | |
Maximum resistance to puncture pressure | 内部方法 | 125 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top