HDPE PRE-ELEC® TP 11270

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ASTMD955	2.5到3.5 %
Shrinkage rate	Shrinkage rate		ISO294-4	2.5到3.5 %
density		ASTMD792	1.05 g/cm³
density	density		ISO1183	1.03 g/cm³
melt mass-flow rate		ASTMD1238,ISO1133	15 g/10min

hardness	Test Condition	Test Method	Test Result
	Shore A	ASTMD2240,ISO868	97
			ASTMD2240,ISO868	70

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTMD638	24.8 MPa
	tensile strength		ASTMD638	24.8 MPa
		tensile strength		ISO527-2	25.0 MPa
			tensile strength		ISO527-2	25.0 MPa
				tensile strength		ASTMD638	46.2 MPa
					tensile strength	Across Flow	ASTMD638	26.2 MPa
						tensile strength		ISO527-2	46.0 MPa
						tensile strength	tensile strength		ISO527-2	27.0 MPa
elongation		ASTMD638,ISO527-2	26 %
	elongation		ASTMD638,ISO527-2	8.0 %
		elongation		ASTMD638	>600 %
			elongation		ASTMD638	>600 %
				elongation		ISO527-2	>600 %
				elongation	elongation		ISO527-2	>600 %
Flexural modulus		ASTMD790,ISO178	1200 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ASTMD256	13 kJ/m²
Impact strength of simply supported beam without notch		ISO179,ASTMD256	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO179,ASTMD256	无断裂
Impact strength of cantilever beam gap		ASTMD256	4.20 kJ/m²
	Impact strength of cantilever beam gap		ASTMD256	12.6 kJ/m²
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180	5.0 kJ/m²
Charpy Notched Impact Strength		ISO179	4.0 kJ/m²
	Charpy Notched Impact Strength		ASTMD256	4.2 kJ/m²
	Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO179	12 kJ/m²
Impact strength of cantilever beam gap		ISO180	13 kJ/m²
Suspended wall beam without notch impact strength		ASTMD256	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength		ASTMD256	无断裂
		ISO180	无断裂
			ISO180	无断裂

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ESDSTM11.11,IEC61340-2-3	<1.0E+5 ohms
Volume resistivity		内部方法	<1.0E+4 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
vicat		ASTMD15256,ISO306/A506	127 °C
	vicat		ISO306/B50	87.0 °C
	vicat	vicat		ASTMD15255	60.0 °C
		ASTMD648B	82.2 °C
			ISO75-2/Bf	76.0 °C
				ASTMD648A	47.8 °C
					ISO75-2/Af	45.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top