PCTA Eastar™ Z6006 EASTMAN USA
472
- Properties:transparentCrystallization occurs atBalanced mold temperatureNo hot spots
- Usages:Higher impact strengthCan replace transparent ABS or some PC application
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmittance | ASTM D-1003 | 91 % | |
| Haze ratio | ASTM D-1003 | 0.3 % | |
| Shrinkage rate | ASTM D-955 | 0.002-0.006 in/in |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 15 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ASTM D-638 | 6700/7700 psi | |
| tensile strength | ASTM D-790 | 9700 psi | |
| Rockwell hardness | ASTM D-785 | 105 R | |
| Impact strength of cantilever beam gap | ASTM D-256 | 7/1.1 ft-lb/in | |
| elongation at break | ASTM D-638 | 5/310 % | |
| Flexural modulus | ASTM D-790 | 2.75×105 psi |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| intrinsic viscosity | 0.72 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| combustibility | UL 94 | V-2 | |
| Heat distortion temperature | ASTM D-648 | 65 °C | |
| ASTM D-648 | 73 °C | ||
| vicat | ASTM D-1525 | 85 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top