PPS

PPS DIC.PPS SE-730 DIC Corporation

Properties:
Filler glass fiber reinforced material 30% filler by weight
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ASTM D256	650 J/m
Impact strength of cantilever beam gap		ASTM D256	100 J/m

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.8mm	UL 94	V-0

mechanical properties	Test Condition	Test Method	Test Result
Elongation at Break		ASTM D790	2.7 %
Poisson's ratio			0.36
compressive strength		ASTM D695	170 MPa
bending strength		ASTM D790	220 MPa
Bending modulus		ASTM D790	10000 MPa
elongation	Break	ASTM D638	2.2 %
tensile strength		ASTM D638	150 MPa
Tensile modulus		ASTM D638	11000 MPa
Friction coefficient	Steel - Static	ASTM D1894	0.36
Friction coefficient	Friction coefficient	Steel - Dynamic	ASTM D1894	0.35

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	255 °C
Linear coefficient of thermal expansion	MD:-30to90°C	ASTM D696	2.4E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD:-30to90°C	ASTM D696	2.4E-05 cm/cm/°C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	23°C,24hr	ASTM D570	0.040 %
Shrinkage rate	TD	ASTM D955	1.0 %
Shrinkage rate	Shrinkage rate	MD	ASTM D955	0.30 %
density		ASTM D792	1.48 g/cm³

Electrical performance	Test Condition	Test Method	Test Result
Arc resistance		ASTM D495	120 sec
Dissipation factor	1MHz	ASTM D150	2E-03
Dielectric constant	1MHz	ASTM D150	3.00
Dielectric strength	1.60mm	ASTM D149	16 kV/mm
Volume resistivity		ASTM D257	1E+16 ohms·cm

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTM D785	121
Rockwell hardness	Rockwell hardness	M-Scale	ASTM D785	100

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top