plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS DIC.PPS SE-730 DIC Corporation
--
--
Filler, glass fiber reinforced material, 30%, filler by weight,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Rockwell hardnessM-ScaleASTM D785100
R-ScaleASTM D785121
thermal performanceTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Hot deformation temperature1.8MPa,UnannealedASTM D648255 °C
Linear coefficient of thermal expansionTD:-30to90°CASTM D6962.4E-05 cm/cm/°C
MD:-30to90°CASTM D6962.4E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Bending modulusASTM D79010000 MPa
bending strengthASTM D790220 MPa
compressive strengthASTM D695170 MPa
elongationBreakASTM D6382.2 %
Elongation at BreakASTM D7902.7 %
Friction coefficientSteel - DynamicASTM D18940.35
Steel - StaticASTM D18940.36
Poisson's ratio0.36
Tensile modulusASTM D63811000 MPa
tensile strengthASTM D638150 MPa
Electrical performanceTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Arc resistanceASTM D495120 sec
Dielectric constant1MHzASTM D1503.00
Dielectric strength1.60mmASTM D14916 kV/mm
Dissipation factor1MHzASTM D1502E-03
Volume resistivityASTM D2571E+16 ohms·cm
Physical propertiesTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
densityASTM D7921.48 g/cm³
Shrinkage rateMDASTM D9550.30 %
TDASTM D9551.0 %
Water absorption rate23°C,24hrASTM D5700.040 %
impact performanceTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Impact strength of cantilever beam gapASTM D256100 J/m
Suspended wall beam without notch impact strengthASTM D256650 J/m
flammabilityTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
UL flame retardant rating0.8mmUL 94V-0

Contact Us

Get App

Top