TSU-Ether InnoTuf® HP-2120A
0
CompareTechnical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Demold Time | 300到420 min | ||
| Resin | 按容量计算的混合比:100按重量计算的混合比:100 | ||
| Hardener | 按容量计算的混合比:44按重量计算的混合比:43 |
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.03 g/cm³ | ||
| 1.04 g/cm³ | |||
| Base Resin | 1.06 g/cm³ | ||
| Shrinkage rate | ASTMD2566 | 0.20到0.50 % |
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 0.13 Pa·s | |||
| 0.48 Pa·s | |||
| 0.63 Pa·s | |||
| 29 hr | |||
| 15到25 min |
| Cured Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Supporting hardness | ASTMD2240 | 15到25 | |
| tensile strength | ASTMD638 | 1.79 MPa | |
| elongation | Break | ASTMD638 | 500 % |
| tear strength | ASTMD624 | 5.25 kN/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top