Technical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|
| 收缩率 | MD | ASTMD955 | 0.40 % |
| 收缩率 | TD | ASTMD955 | 0.80 % |
| 吸水率 | 24hr | ASTMD570 | 0.23 % |
| 热性能 | Test Condition | Test Method | Test Result |
|---|
| 熔融温度 | | ISO11357-3 | 327 °C |
| 线性热膨胀系数 | MD：0to100°C | ASTME831 | 2E-05 cm/cm/°C |
| 线性热膨胀系数 | MD：100到200°C | ASTME831 | 1.5E-05 cm/cm/°C |
| 线性热膨胀系数 | TD：0to100°C | ASTME831 | 7.6E-05 cm/cm/°C |
| 线性热膨胀系数 | TD：100到200°C | ASTME831 | 1.2E-04 cm/cm/°C |
| 热变形温度 | 1.8MPa,未退火 | ISO75-2/A | >300 °C |
| 玻璃转化温度 | | DSC | 95.0 °C |
| 可燃性 | Test Condition | Test Method | Test Result |
|---|
| FlameRating2 | 3.2mm | UL94 | HB |
| 电气性能 | Test Condition | Test Method | Test Result |
|---|
| 耗散因数 | 1MHz | ASTMD150 | 0.015 |
| 相比耐漏电起痕指数(CTI) | CTI | UL746 | 600 V |
| 高电压电弧起痕速率(HVTR) | HVTR | UL746 | 14.0 mm/min |
| 体积电阻率 | | ASTMD257 | 5.6E+15 ohms·cm |
| 介电强度 | 3.20mm | ASTMD149 | 19 KV/mm |
| 介电常数 | 60Hz | ASTMD150 | 4.10 |
| 介电常数 | 1MHz | ASTMD150 | 3.75 |
| 耗散因数 | 60Hz | ASTMD150 | 6E-03 |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|
| 拉伸模量 | 23°C | ISO527-2 | 12000 Mpa |
| 拉伸应力 | 断裂,23°C | ISO527-2 | 210 Mpa |
| 拉伸应变 | 断裂,23°C | ISO527-2 | 2.5 % |
| 弯曲模量 | 23°C | ISO178 | 10700 Mpa |
| 弯曲应力 | 23°C | ISO178 | 295 Mpa |
| 弯曲应变 | | ISO178 | 3.1 % |
| 冲击性能 | Test Condition | Test Method | Test Result |
|---|
| 简支梁无缺口冲击强度 | 23°C | ISO179/1eU | 79 kJ/m² |
| 无缺口伊佐德冲击强度 | 23°C | ISO180/1U | 68 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices