Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.17 g/cm³ |
| density | | ISO1183/B | 1.18 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 11 g/10min |
| melt mass-flow rate | | ASTMD1238 | 20 g/10min |
| melt mass-flow rate | | ISO1133 | 13 g/10min |
| Shrinkage rate | | ISO294-4 | 0.40到0.60 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 120 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | 5VA |
| Burning wire flammability index | | IEC60695-2-12 | 925 °C |
| Burning wire flammability index | | IEC60695-2-12 | 925 °C |
| Burning wire flammability index | | IEC60695-2-12 | 925 °C |
| Burning wire flammability index | | IEC60695-2-12 | 950 °C |
| Limiting Oxygen Index | | ASTMD2863 | 28 % |
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | 5VB |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 480 J/m |
| Impact strength of cantilever beam gap | | ISO180/A | 14 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/A | 50 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 15 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 40 kJ/m² |
| Impact strength of cantilever beam gap | | ASTMD256 | 440 J/m |
| Impact strength of cantilever beam gap | | ASTMD256 | 200 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | | ISO527-2/50 | 3.8 % |
| elongation | Break | ASTMD638 | 65 % |
| elongation | | ISO527-2/50 | 43 % |
| Flexural modulus | | ASTMD790 | 2690 MPa |
| bending strength | Yield | ASTMD790 | 96.5 MPa |
| Tensile modulus | | ASTMD638 | 2620 MPa |
| Tensile modulus | | ISO527-2/1 | 2560 MPa |
| tensile strength | Yield | ASTMD638 | 60.0 MPa |
| tensile strength | | ISO527-2/50 | 55.0 MPa |
| tensile strength | Break | ASTMD638 | 48.3 MPa |
| tensile strength | | ISO527-2/50 | 45.0 MPa |
| elongation | Yield | ASTMD638 | 3.8 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | IEC60243-1 | 18 kV/mm |
| | IEC60250 | 2.86 |
| | IEC60250 | 2.80 |
| Dissipation Factor | | IEC60250 | 4E-03 |
| Dissipation Factor | | IEC60250 | 7E-03 |
| Surface Resistivity | | IEC60093 | 5.2E+15 ohms |
| Volume resistivity | | IEC60093 | 1E+18 ohms·cm |
| dielectric strength | | IEC60243-1 | 26 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 90.6 °C |
| | ISO75-2/B | 88.0 °C |
| | ASTMD648 | 79.4 °C |
| | ISO75-2/A | 77.0 °C |
| vicat | | ASTMD15253,ISO306/A1203 | 104 °C |
| vicat | | ISO306/B50 | 94.0 °C |
| | ASTMD696 | 6.8E-05 cm/cm/°C |
| | ASTMD696 | 6.8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare