PA66 ST801 NC010 Dow DuPont

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
elongation	Yield	ASTM D-638	DAM｜5.5 %
elongation	elongation	Yield	ASTM D-638	51%RH｜- %

Basic performance	Test Condition	Test Method	Test Result
tensile strength		ASTM D-638	50%RH｜41.4 MPa
	tensile strength	Yield	ASTM D-638	DAM｜50 MPa
	tensile strength	tensile strength	Yield	ASTM D-638	50%RH｜- MPa
elongation	Break	ASTM D-638	DAM｜60 %
elongation	elongation	Break	ASTM D-638	51%RH｜210 %
tensile strength		ASTM D-638	DAM｜51.7 MPa

Mechanical properties	Test Condition	Test Method	Test Result
Flexural modulus		ASTM D-790	DAM｜1689 MPa
Flexural modulus	Flexural modulus		ASTM D-790	52%RH｜-862 MPa
bending strength		ASTM D-790	DAM｜68 J/m
bending strength	bending strength		ASTM D-790	53%RH｜- J/m
Impact strength of cantilever beam gap		ASTM D-256	DAM｜907 %
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D-256	53%RH｜1068 %
Tensile strain			DAM｜0.41 MPa
Tensile strain	Tensile strain			52%RH｜- MPa

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant		ASTM D-150	DAM｜3.2
	dielectric constant		ASTM D-150	51%RH｜5.5
		dielectric constant		ASTM D-150	DAM｜3.2
			dielectric constant		ASTM D-150	51%RH｜4.5
			dielectric constant	dielectric constant		ASTM D-150	52%RH｜3.2
Dissipation Factor		ASTM D-150	DAM｜0.04
dielectric constant		ASTM D-150	DAM｜2.9
Dissipation Factor		ASTM D-150	52%RH｜0.20
	Dissipation Factor		ASTM D-150	DAM｜0.01
		Dissipation Factor		ASTM D-150	53%RH｜0.10
			Dissipation Factor		ASTM D-150	DAM｜0.02
			Dissipation Factor	Dissipation Factor		ASTM D-150	53%RH｜0.05
Volume resistivity		ASTM D-257	DAM｜1014 ohm.cm
Volume resistivity	Volume resistivity		ASTM D-257	54%RH｜1013 ohm.cm

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D-648	52%RH｜- ℃
Linear coefficient of thermal expansion		ASTM D-696	DAM｜1.2 ℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ASTM D-696	52%RH｜- ℃
melting temperature		ASTM D-3418	263 ℃
UL flame retardant rating		UL 94	HB
UL flame retardant rating	UL flame retardant rating		UL 94	0.81
Heat distortion temperature		ASTM D-648	DAM｜216 ℃
	Heat distortion temperature		ASTM D-648	54%RH｜- ℃
	Heat distortion temperature	Heat distortion temperature		ASTM D-648	DAM｜71 ℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top