Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 ST801 NC010 Dow DuPont
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Dow DuPont/ST801 NC010 |
|---|---|---|---|
| tensile strength | ASTM D-638 | DAM｜51.7 MPa | |
| 屈服 | ASTM D-638 | 50%RH｜- MPa | |
| elongation | 断裂 | ASTM D-638 | 51%RH｜210 % |
| Mechanical properties | Test Condition | Test Method | Dow DuPont/ST801 NC010 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D-256 | 53%RH｜1068 % | |
| bending strength | ASTM D-790 | 53%RH｜- J/m | |
| Tensile strain | 52%RH｜- MPa | ||
| Flexural modulus | ASTM D-790 | 52%RH｜-862 MPa |
| Electrical performance | Test Condition | Test Method | Dow DuPont/ST801 NC010 |
|---|---|---|---|
| Dissipation Factor | 106Hz | ASTM D-150 | 53%RH｜0.05 |
| dielectric constant | 102Hz | ASTM D-150 | 51%RH｜5.5 |
| Dissipation Factor | 103Hz | ASTM D-150 | 53%RH｜0.10 |
| dielectric constant | 103Hz | ASTM D-150 | 51%RH｜4.5 |
| Dissipation Factor | 102Hz | ASTM D-150 | 52%RH｜0.20 |
| dielectric constant | 106Hz | ASTM D-150 | DAM｜2.9 |
| Volume resistivity | ASTM D-257 | 54%RH｜1013 ohm.cm |
| physical property | Test Condition | Test Method | Dow DuPont/ST801 NC010 |
|---|---|---|---|
| elongation | 屈服 | ASTM D-638 | 51%RH｜- % |
| Thermal performance | Test Condition | Test Method | Dow DuPont/ST801 NC010 |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D-696 | 52%RH｜- ℃ | |
| melting temperature | ASTM D-3418 | 263 ℃ | |
| Heat distortion temperature | 未退火，0.45MPa，HDT | ASTM D-648 | 54%RH｜- ℃ |
| UL flame retardant rating | mm | UL 94 | 0.81 |
| Heat distortion temperature | 未退火，1.8MPa，HDT | ASTM D-648 | DAM｜71 ℃ |
| UL flame retardant rating | UL 94 | HB |
Contact Us
Get App
Top