Technical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|
| characteristic | | | 抗撞击性高、韧性好、中等粘性 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO 1133 | 5.0 g/10 min |
| Water absorption rate | | ASTM D570 | 0.24 % |
| melt mass-flow rate | | ASTM D1238 | 4.0 g/10 min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | | ASTM D638 | 300 % |
| Flexural modulus | | ASTM D790 | 1340 MPa |
| bending strength | | ASTM D790 | 47.0 MPa |
| Flexural modulus | | ISO 178 | 1400 MPa |
| bending strength | | ISO 178 | 53.0 MPa |
| Impact strength of simply supported beam without notch | | ISO 179/1eA | 18 kJ/m² |
| Impact strength of cantilever beam gap | | ASTM D256 | 255 J/m |
| Flexural modulus | | ASTM D790/ISO 178 | 181000 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 6670 kg/cm²(MPa)[Lb/in²] |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Relative Heat Index (RTI) | | UL 746 | 50.0 °C |
| Relative Heat Index (RTI) | | UL 746 | 50.0 °C |
| Relative Heat Index (RTI) | | UL 746 | 50.0 °C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.34 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 83.0 °C |
| Heat distortion temperature | | ISO 75-2/A | 72.0 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 0.00013 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices