Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM FU2025 KEP KOREA
KEPITAL®
Automotive sector,Electronic data processing,Mechanical components,Industrial components
Antichemical,Creep resistance,High impact resistance,Thermal stability,Weather resistance,Medium to high viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Other performance | Test Condition | Test Method | KEP KOREA/FU2025 |
---|---|---|---|
Relative Heat Index (RTI) | 0.8mm,无机械性能 | UL 746 | 50.0 °C |
0.8mm,电气 | UL 746 | 50.0 °C | |
0.8mm,冲击 | UL 746 | 50.0 °C | |
UL flame retardant rating | 0.8mm | UL 94 | HB |
Basic Performance | Test Condition | Test Method | KEP KOREA/FU2025 |
---|---|---|---|
melt mass-flow rate | ISO 1133 | 5.0 g/10 min | |
190℃/2.16kg | ASTM D1238 | 4.0 g/10 min | |
Water absorption rate | Equilibrium,23℃,60%rh | ASTM D570 | 0.24 % |
thermal performance | Test Condition | Test Method | KEP KOREA/FU2025 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 83.0 °C |
1.8MPa,Unannealed | ISO 75-2/A | 72.0 °C | |
Linear coefficient of thermal expansion | flow,20 to 80°C | ASTM D696 | 0.00013 cm/cm/°C |
mechanical properties | Test Condition | Test Method | KEP KOREA/FU2025 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 1400 MPa |
23°C | ASTM D790 | 1340 MPa | |
ASTM D790/ISO 178 | 181000 kg/cm²(MPa)[Lb/in²] | ||
bending strength | ASTM D790/ISO 178 | 6670 kg/cm²(MPa)[Lb/in²] | |
23°C | ASTM D790 | 47.0 MPa | |
23°C | ISO 178 | 53.0 MPa | |
elongation | Break,23℃ | ASTM D638 | 300 % |
Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 255 J/m |
Impact strength of simply supported beam without notch | ISO 179/1eA | 18 kJ/m² |
other | Test Condition | Test Method | KEP KOREA/FU2025 |
---|---|---|---|
characteristic | 抗撞击性高、韧性好、中等粘性 |
Physical properties | Test Condition | Test Method | KEP KOREA/FU2025 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.34 |