PC/CF LNP™ STAT-KON™ DC-1002
28
- Properties:Easy to formEasy to demould
- Usages:Plastic bagElectrical appliancesElectronic and Electrical Applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTMD955 | 0.20to0.40 % | |
| ASTMD955 | 0.40to0.60 % | ||
| Water absorption rate | ASTMD570 | 0.080 % | |
| ISO62 | 0.080 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 11100 Mpa | |
| ISO527-2/1 | 10300 Mpa | ||
| tensile strength | ASTMD638 | 97.0 Mpa | |
| Tensile stress | ISO527-2/5 | 97.0 Mpa | |
| elongation | ASTMD638 | 7.5 % | |
| Tensile strain | ISO527-2/5 | 7.3 % | |
| Flexural modulus | ASTMD790 | 7460 Mpa | |
| ISO178 | 7440 Mpa | ||
| Bending stress | ISO178 | 149 Mpa | |
| Bending strength 5 | ASTMD790 | 158 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam notch impact strength 6 | ISO180/1A | 5.3 kJ/m² | |
| Unscented Izod Impact Strength 5 | ISO180/1U | 32 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTMD257 | 1.0E+3to1.0E+5 ohms | |
| Volume resistivity | ASTMD257 | 1.0E+4to1.0E+6 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 146 °C | ||
| Hot deformation temperature 7 | ISO75-2/Bf | 145 °C | |
| ASTMD648 | 141 °C | ||
| Hot deformation temperature 7 | ISO75-2/Af | 142 °C | |
| ASTMD696 | 2.6E-05 cm/cm/°C | ||
| ASTMD696 | 5.8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top