Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC/CF DC-1002 SABIC INNOVATIVE US
LNP™ STAT-KON™
Plastic bag,Electrical appliances,Electronic and Electrical Applications
Easy to form,Easy to demould
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/DC-1002 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,3.20mm | ASTM D648 | 141 °C |
| 1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | 142 °C | |
| 0.45MPa,Unannealed,64.0mmSpan | ISO 75-2/Bf | 145 °C | |
| 0.45MPa,Unannealed,3.20mm | ASTM D648 | 146 °C | |
| Linear coefficient of thermal expansion | TD:-30to30°C | ASTM D696 | 5.8E-05 cm/cm/°C |
| MD:-30to30°C | ASTM D696 | 2.6E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/DC-1002 |
|---|---|---|---|
| Bending modulus | 50.0mmSpan | ASTM D790 | 7460 Mpa |
| ISO 178 | 7440 Mpa | ||
| bending strength | Break,50.0mmSpan | ASTM D790 | 158 Mpa |
| ISO 178 | 149 Mpa | ||
| elongation | Break | ASTM D638 | 7.5 % |
| Tensile modulus | ISO 527-2/1 | 10300 Mpa | |
| ASTM D638 | 11100 Mpa | ||
| Tensile strain | Break | ISO 527-2/5 | 7.3 % |
| tensile strength | Break | ISO 527-2/5 | 97.0 Mpa |
| Break | ASTM D638 | 97.0 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/DC-1002 |
|---|---|---|---|
| Surface resistivity | ASTM D257 | 1.0E+3to1.0E+5 ohms | |
| Volume resistivity | ASTM D257 | 1.0E+4to1.0E+6 ohms·cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/DC-1002 |
|---|---|---|---|
| Shrinkage rate | TD:24hr | ASTM D955 | 0.40-0.60 % |
| MD:24hr | ASTM D955 | 0.20-0.40 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.080 % |
| 24hr,50%RH | ASTM D570 | 0.080 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/DC-1002 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 5.3 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 32 kJ/m² |