PC+ABS PRE-ELEC® ESD 7200

Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO 1183	1.12 g/cm³
melt mass-flow rate	ASTMD1238	3.5 g/10min
density	ASTM D792	1.11 g/cm³

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ASTMD638	40.0 MPa
	tensile strength		ASTM D638	40.0 MPa
	tensile strength	tensile strength		ISO 527-2	40.0 MPa
elongation	Yield	ASTMD638	10 %
	elongation	Break	ASTM D638	150 %
	elongation	elongation		ISO 527-2	150 %
Flexural modulus		ASTM D790	1720 MPa
Flexural modulus	Flexural modulus		ISO 178	1700 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	2.94 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180	77 kJ/m²
Suspended wall beam without notch impact strength		ASTM D256	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength		ISO 180	无断裂

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ESDSTM11.11,IEC61340-2-3	<1.0E+11 ohms
StaticDecay		IEC 61340-5-1	<2.0 sec
StaticDecay	StaticDecay		ESDS20.20	<2.0 sec

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/Af	87.0 °C
vicat		ASTMD15253	101 °C
vicat	vicat		ASTMD15254	121 °C
Heat distortion temperature		ASTMD648B	106 °C
Heat distortion temperature	Heat distortion temperature		ASTM D648A	87.2 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top