Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS PRE-ELEC® ESD 7200 Premix Oy
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Premix Oy/PRE-ELEC® ESD 7200 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,4.00mm | ASTM D256 | 2.94 kJ/m² |
| 23°C | ISO 180 | 77 kJ/m² | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | 无断裂 |
| 23°C,4.00mm | ASTM D256 | 无断裂 |
| Electrical performance | Test Condition | Test Method | Premix Oy/PRE-ELEC® ESD 7200 |
|---|---|---|---|
| StaticDecay | -- | ESDS20.20 | <2.0 sec |
| -- | IEC 61340-5-1 | <2.0 sec | |
| Surface Resistivity | ESDSTM11.11,IEC61340-2-3 | <1.0E+11 ohms |
| Mechanical properties | Test Condition | Test Method | Premix Oy/PRE-ELEC® ESD 7200 |
|---|---|---|---|
| elongation | 屈服 | ASTMD638 | 10 % |
| tensile strength | -- | ASTM D638 | 40.0 MPa |
| elongation | 断裂 | ASTM D638 | 150 % |
| 断裂,4.00mm | ISO 527-2 | 150 % | |
| Flexural modulus | 4.00mm | ASTM D790 | 1720 MPa |
| 4.00mm | ISO 178 | 1700 MPa | |
| tensile strength | 屈服 | ASTMD638 | 40.0 MPa |
| 4.00mm | ISO 527-2 | 40.0 MPa |
| physical property | Test Condition | Test Method | Premix Oy/PRE-ELEC® ESD 7200 |
|---|---|---|---|
| density | -- | ASTM D792 | 1.11 g/cm³ |
| melt mass-flow rate | 230°C/2.16kg | ASTMD1238 | 3.5 g/10min |
| density | -- | ISO 1183 | 1.12 g/cm³ |
| Thermal performance | Test Condition | Test Method | Premix Oy/PRE-ELEC® ESD 7200 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/Af | 87.0 °C |
| vicat | -- | ASTMD15254 | 121 °C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | 87.2 °C |
| 0.45MPa,未退火，HDT | ASTMD648B | 106 °C | |
| vicat | -- | ASTMD15253 | 101 °C |
Contact Us
Get App
Top