PC/PTFE LNP™ LUBRICOMP™ DFL22

Properties:
Easy to form
Easy to demould
Usages:
Electronic and Electrical Applications
Lighting applications
Compare
View Prices

Technical Data Sheet

physical property	Test Method	Test Result
Flow: 24 hours	ASTMD955	0.40到0.60 %
Water absorption rate	ASTMD570	0.10 %
Lateral flow: 24 hours	ASTMD955	0.60到0.80 %
Vertical flow direction: 24 hours	ISO294-4	0.65 %
Flow direction: 24 hours	ISO294-4	0.50 %

Mechanical properties	Test Condition	Test Method	Test Result
Wear factor - Washer		ASTMD3702Modified	166 10^-10in^5-min/ft-lb-hr
Bending stress		ISO178	118 Mpa
--1		ASTMD638	4140 Mpa
fracture		ASTMD638	5.5 %
yield		ASTMD638	71.7 Mpa
yield	yield		ISO527-2	71.0 Mpa
fracture		ASTMD638	67.6 Mpa
		ASTMD3702Modified	0.38
yield		ASTMD638,ISO527-2	3.3 %
		ASTMD3702Modified	0.44
fracture		ISO527-2	5.8 %
fracture	fracture		ISO527-2	67.0 Mpa

Impact resistance	Test Method	Test Result
23°C	ASTMD4812	740 J/m
23°C3	ISO180/1U	49 kJ/m²
23°C,EnergyatPeakLoad	ASTMD3763	23.2 J
23°C	ASTMD256	140 J/m
23°C2	ISO180/1A	13 kJ/m²

Thermal performance	Test Method	Test Result
0.45MPa, Unanealed, 64.0mm span 4	ISO75-2/Bf	146 °C
1.8MPa, Unanealed, 3.20mm	ASTMD648	140 °C
	ASTME831,ISO11359-2	5.6E-05 cm/cm/°C
1.8MPa, Unanealed, 64.0mm span 5	ISO75-2/Af	140 °C
	ASTME831,ISO11359-2	5.6E-05 cm/cm/°C
0.45MPa, Unanealed, 3.20mm	ASTMD648	145 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PC/PTFE LNP™ LUBRICOMP™ DFL22

Technical Data Sheet

You May Like