Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.34 g/cm³ |
| thickness | | | 254.0to330.2 µm |
| flammability | Test Condition | Test Method | Test Result |
|---|
| NBSSmokeDensity | | ASTMF814/E662 | Passed |
| NBSSmokeDensity | | ASTMF814/E662 | Passed |
| OSU total heat release | | FAR25.853 | 16.0 kW·min/m² |
| OSU total heat release | | FAR25.853 | 36.0 kW/m² |
| UL combustion rating | | FAR25.853 | 2.0 sec |
| exothermic | | FAR25.853 | Passed |
| UL flame retardant rating | | FAR25.853 | <5.00 |
| UL flame retardant rating | | UL 94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Outgassing | | ASTME595 | -0.10 % |
| Outgassing | | ASTME595 | 0.41 % |
| Outgassing | | ASTME595 | -0.37 % |
| Antifungal activity | | MILSTD-810G | Passed |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 2220 MPa |
| tensile strength | | ASTM D638 | 71.7 MPa |
| elongation | | ASTM D638 | 6.0 % |
| Flexural modulus | | ASTM D790 | 2500 MPa |
| shear strength | | ASTM D732 | 57.2 MPa |
| bending strength | | ASTM D790 | 115 MPa |
| Compression Modulus | | ASTM D732 | 1930 MPa |
| compressive strength | | ASTM D695 | 105 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256A | 110 J/m |
| Suspended wall beam without notch impact strength | | ASTM D256 | 610 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 4.3to11 kV/mm |
| dielectric constant | | ASTM D150 | 3.00to3.20 |
| Dissipation Factor | | ASTM D150 | 2.6E-3到2.7E-3 |
| Volume resistivity | | ASTM D257 | 6.0E+13到1.0E+14 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 153 °C |
| Glass Transition Temperature | | DSC | 367 °C |
| Linear coefficient of thermal expansion | | ASTME228 | 6.6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare