PA12

PA12 VESTAMID® E62S3 EVONIK GERMANY

Properties:
Easy to processLow temperature impact rePhotostabilityAntisolventHigh elasticitylow density
Usages:
Engine partsConveyor accessoriessporting goods
Compare View Prices

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	-30℃，Complete Break-22°F, Complete Break	ISO 179/1eA	8 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23℃，Partial Break73°F, Partial Break	ISO 179/1eA	120 kJ/m²
Impact strength of simply supported beam without notch	-30℃-30°C	ISO 179/1eU	No Break
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23℃23°C	ISO 179/1eU	No Break

mechanical properties	Test Condition	Test Method	Test Result
Shore hardness	Shore DShore D	ISO 868	62
Tensile modulus		ISO 527-2	370 Mpa
tensile strength	----	ISO 527-2	42 Mpa
tensile strength	tensile strength	50% Strain50% Strain	ISO 527-2	23 Mpa
Tensile strain	BreakBreak	ISO 527-2	> 200 %
Tensile creep modulus	1000 hr1000 hr	ISO 899-1	200 Mpa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8 MPa，Unannealed1.8 MPa，Unannealed	ISO 75-2/A	45 °C
Hot deformation temperature	Hot deformation temperature	0.45 MPa，Unannealed0.45 MPa，Unannealed	ISO 75-2/B	100 °C
Vicat softening temperature	----	ISO 306/A	165 °C
Vicat softening temperature	Vicat softening temperature	----	ISO 306/B	110 °C
Linear coefficient of thermal expansion	TD：23~55℃TD：23 to 55℃	ISO 11359-2	0.00020 1/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：23~55℃MD：23 to 55℃	ISO 11359-2	0.00020 1/℃

Physical properties	Test Condition	Test Method	Test Result
density		ISO 1183	1.03 g/cm³
Shrinkage rate	TDAcross Flow	ISO 294-4	0.90 - 1.4 %
Shrinkage rate	Shrinkage rate	MDFlow	ISO 294-4	0.60 - 1.1 %
Water absorption rate	Saturation，23℃Saturation，23℃	ISO 62	1.1 %
Stickiness		ISO 307	190 cm³/g

Electrical performance	Test Condition	Test Method	Test Result
Surface resistivity		IEC 60093	100000000000000 ohms
Volume resistivity		IEC 60093	1000000000000 ohms·cm
Dielectric strength		IEC 60243-1	39 KV/mm
Relative permittivity	23℃，100 Hz23°C, 100 Hz	IEC 60250	9
Relative permittivity	Relative permittivity	23℃，1 MHz23°C, 1 MHz	IEC 60250	4
Dissipation factor	23℃，100 Hz23°C, 100 Hz	IEC 60250	0.1
Dissipation factor	Dissipation factor	23℃，1 MHz23°C, 1 MHz	IEC 60250	0.12
Compared to the anti leakage trace index	Solution ASolution A	IEC 60112	PLC 0

flame retardant performance	Test Condition	Test Method	Test Result
1.60 mm??1.6 mm	1.60mm	UL 94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PA12 VESTAMID® E62S3 EVONIK GERMANY

Technical Data Sheet

You May Like