Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 E62S3 EVONIK GERMANY
VESTAMID®
Engine parts、Conveyor accessories、sporting goods
Easy to process、Low temperature impact re、Photostability、Antisolvent、High elasticity、low density
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EVONIK GERMANY/E62S3 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23℃，局部断裂73°F, Partial Break | ISO 179/1eA | 120 kJ/m² |
| -30℃，完全断裂-22°F, Complete Break | ISO 179/1eA | 8 kJ/m² | |
| Impact strength of simply supported beam without notch | 23℃23°C | ISO 179/1eU | No Break |
| -30℃-30°C | ISO 179/1eU | No Break |
| Mechanical properties | Test Condition | Test Method | EVONIK GERMANY/E62S3 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 370 Mpa | |
| Shore hardness | 邵氏 D邵氏 D | ISO 868 | 62 |
| Tensile strain | 断裂断裂 | ISO 527-2 | > 200 % |
| Tensile creep modulus | 1000 hr1000 hr | ISO 899-1 | 200 Mpa |
| tensile strength | ---- | ISO 527-2 | 42 Mpa |
| 50% 应变50% Strain | ISO 527-2 | 23 Mpa |
| Electrical performance | Test Condition | Test Method | EVONIK GERMANY/E62S3 |
|---|---|---|---|
| Dissipation Factor | 23℃，1 MHz23°C, 1 MHz | IEC 60250 | 0.12 |
| Compared to the Leakage Tracking Index (CTI) | 解决方案 A解决方案 A | IEC 60112 | PLC 0 |
| dielectric strength | IEC 60243-1 | 39 KV/mm | |
| relative permittivity | 23℃，1 MHz23°C, 1 MHz | IEC 60250 | 4 |
| 23℃，100 Hz23°C, 100 Hz | IEC 60250 | 9 | |
| Dissipation Factor | 23℃，100 Hz23°C, 100 Hz | IEC 60250 | 0.1 |
| Surface Resistivity | IEC 60093 | 100000000000000 ohms | |
| Volume resistivity | IEC 60093 | 1000000000000 ohms·cm |
| Flame retardant performance | Test Condition | Test Method | EVONIK GERMANY/E62S3 |
|---|---|---|---|
| 1.60 mm??1.6 mm | 1.60mm | UL 94 | HB |
| physical property | Test Condition | Test Method | EVONIK GERMANY/E62S3 |
|---|---|---|---|
| Shrinkage rate | MDFlow | ISO 294-4 | 0.60 - 1.1 % |
| Water absorption rate | 饱和，23℃饱和，23℃ | ISO 62 | 1.1 % |
| viscosity number | ISO 307 | 190 cm³/g | |
| density | ISO 1183 | 1.03 g/cm³ | |
| Shrinkage rate | TDAcross Flow | ISO 294-4 | 0.90 - 1.4 % |
| Thermal performance | Test Condition | Test Method | EVONIK GERMANY/E62S3 |
|---|---|---|---|
| Heat distortion temperature | 0.45 MPa，未退火0.45 MPa，未退火，HDT | ISO 75-2/B | 100 °C |
| vicat | ---- | ISO 306/B | 110 °C |
| Heat distortion temperature | 1.8 MPa，未退火1.8 MPa，未退火，HDT | ISO 75-2/A | 45 °C |
| Linear coefficient of thermal expansion | MD：23~55℃MD：23 到 55℃ | ISO 11359-2 | 0.00020 1/℃ |
| TD：23~55℃TD：23 到 55℃ | ISO 11359-2 | 0.00020 1/℃ | |
| vicat | ---- | ISO 306/A | 165 °C |
Contact Us
Get App
Top