TEEE RTP 1503-55D RTP US
0
- Properties:Fillerglass fiber reinforced material20%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.35 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.17to0.25 % | |
| water content | <0.10 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 65 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Primary Additive | 20 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D4812 | 1100 J/m | |
| Impact strength of cantilever beam gap | ASTM D256 | 340 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2280 MPa | |
| tensile strength | ASTM D638 | 43.1 MPa | |
| elongation | Yield | ASTM D638 | 8.8 % |
| Flexural modulus | ASTM D790 | 1650 MPa | |
| bending strength | ASTM D790 | 50.0 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top