Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TEEE RTP 1503-55D RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 1503-55D |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 1100 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 340 J/m |
| Supplementary Information | Test Condition | Test Method | RTP US/RTP 1503-55D |
|---|---|---|---|
| Primary Additive | 20 % |
| hardness | Test Condition | Test Method | RTP US/RTP 1503-55D |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 65 |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 1503-55D |
|---|---|---|---|
| tensile strength | ASTM D638 | 43.1 MPa | |
| elongation | 屈服 | ASTM D638 | 8.8 % |
| Tensile modulus | ASTM D638 | 2280 MPa | |
| Flexural modulus | ASTM D790 | 1650 MPa | |
| bending strength | ASTM D790 | 50.0 MPa |
| physical property | Test Condition | Test Method | RTP US/RTP 1503-55D |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.17to0.25 % |
| water content | <0.10 % | ||
| density | ASTM D792 | 1.35 g/cm³ |
Contact Us
Get App
Top