Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.10 g/cm³ |
| Thickness-LayerCapability | | | 127.0到330.2 µm |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTMD785 | 110 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 40.7 MPa |
| elongation | | ASTMD638 | 6.0 % |
| Flexural modulus | | ASTMD790 | 1930 MPa |
| bending strength | | ASTMD790 | 67.6 MPa |
| Tensile modulus | | ASTMD638 | 1920 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256A | 200 J/m |
| Suspended wall beam without notch impact strength | | ASTMD256 | 480 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | 3.5到13 kV/mm |
| dielectric constant | | ASTMD150 | 2.70到2.90 |
| Dissipation Factor | | ASTMD150 | 3.2E-3到3.5E-3 |
| Volume Resistance | | ASTMD257 | 4.4E+13到2.0E+14 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat Deflection Temperature | | ASTMD648 | 110 °C |
| Heat Deflection Temperature | | ASTMD648 | 96.1 °C |
| Linear thermal expansion coefficient | | | 7.4E-05 cm/cm/°C |
| Glass Transition Temperature | | DMA | 125 °C |
| vicat | | ASTMD1525 | 112 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare