Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Stratasys PC-ABS Stratasys
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Stratasys/Stratasys PC-ABS |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 480 J/m |
| Impact strength of cantilever beam gap | 23°C | ASTM D256A | 200 J/m |
| hardness | Test Condition | Test Method | Stratasys/Stratasys PC-ABS |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 110 |
| Mechanical properties | Test Condition | Test Method | Stratasys/Stratasys PC-ABS |
|---|---|---|---|
| elongation | 断裂,3.18mm | ASTM D638 | 6.0 % |
| Tensile modulus | 3.18mm | ASTM D638 | 1920 MPa |
| Flexural modulus | ASTM D790 | 1930 MPa | |
| bending strength | ASTM D790 | 67.6 MPa | |
| tensile strength | 3.18mm | ASTM D638 | 40.7 MPa |
| Electrical performance | Test Condition | Test Method | Stratasys/Stratasys PC-ABS |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 3.2E-3到3.5E-3 | |
| dielectric strength | ASTM D149 | 3.5to13 kV/mm | |
| dielectric constant | ASTM D150 | 2.70to2.90 | |
| Volume resistivity | ASTM D257 | 4.4E+13到2.0E+14 ohms |
| flammability | Test Condition | Test Method | Stratasys/Stratasys PC-ABS |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | Stratasys/Stratasys PC-ABS |
|---|---|---|---|
| thickness | 层能力 | 127.0to330.2 µm | |
| density | ASTM D792 | 1.10 g/cm³ |
| Thermal performance | Test Condition | Test Method | Stratasys/Stratasys PC-ABS |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 96.1 °C |
| vicat | ASTM D1525 | 112 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 110 °C |
| Linear coefficient of thermal expansion | MD | 7.4E-05 cm/cm/°C | |
| Glass Transition Temperature | DMA | 125 °C |
Contact Us
Get App
Top