PA6 NILAMID® B3 CU90 Celanese Corporation

Compare

Technical Data Sheet

physical property	Test Method	Test Result
Water absorption rate	ISO 62	2.5 %
density	ISO 1183	5.20 g/cm³
Water absorption rate	ISO 62	0.80 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	26 kJ/m²
Charpy Notched Impact Strength		ISO 179/1eA	3.0 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO 179/1eA	4.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	20 kJ/m²

Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-2	1500 MPa
tensile strength	ISO 527-2	18.0 MPa
Tensile strain	ISO 527-2	22 %

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		IEC 60093	1E+09 ohms·cm
Surface Resistivity		IEC 60093	1E+08 ohms

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/B	225 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	220 °C
Continuous use temperature		IEC 60216	100 °C
ball-indentation hardness		IEC 60695-10-2	通过
ball-indentation hardness	ball-indentation hardness		IEC 60695-10-2	通过

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top