Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 NILAMID® B3 CU90 Celanese Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Celanese Corporation/NILAMID® B3 CU90 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 4.0 kJ/m² |
| -30°C | ISO 179/1eA | 3.0 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 26 kJ/m² |
| -30°C | ISO 179/1eU | 20 kJ/m² |
| Electrical performance | Test Condition | Test Method | Celanese Corporation/NILAMID® B3 CU90 |
|---|---|---|---|
| Volume resistivity | 23°C | IEC 60093 | 1E+09 ohms·cm |
| Surface Resistivity | IEC 60093 | 1E+08 ohms |
| Mechanical properties | Test Condition | Test Method | Celanese Corporation/NILAMID® B3 CU90 |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2 | 22 % |
| Tensile modulus | 23°C | ISO 527-2 | 1500 MPa |
| tensile strength | 屈服,23°C | ISO 527-2 | 18.0 MPa |
| physical property | Test Condition | Test Method | Celanese Corporation/NILAMID® B3 CU90 |
|---|---|---|---|
| density | 23°C | ISO 1183 | 5.20 g/cm³ |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.80 % |
| 饱和,23°C | ISO 62 | 2.5 % |
| Thermal performance | Test Condition | Test Method | Celanese Corporation/NILAMID® B3 CU90 |
|---|---|---|---|
| Continuous use temperature | IEC 60216 | 100 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 225 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 220 °C | |
| ball-indentation hardness | 165°C | IEC 60695-10-2 | 通过 |
| 125°C | IEC 60695-10-2 | 通过 |
Contact Us
Get App
Top