Phenolic

Phenolic Plenco 05350 (Compression) Plastics Engineering Co.

Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ASTM D256	14.5 J/m
Impact strength of cantilever beam gap		ASTM D256	16 J/m

flammability	Test Condition	Test Method	Test Result
Extreme Oxygen Index		ASTM D2863	41 %

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	14800 MPa
tensile strength		ASTM D638	31.0 MPa
Bending modulus		ASTM D790	13200 MPa
bending strength		ASTM D790	63.1 MPa
compressive strength		ASTM D695	142 MPa
elongation	Break	ASTM D638	0.30 %

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	MD	ASTME831	3.2E-05 cm/cm/°C
thermal conductivity	100°C	ASTMC177	1.9 W/m/K
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	193 °C
Continuous use temperature		ASTM D794	249 °C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792	1.74 g/cm³
Apparent density		ASTM D1895	0.92 g/cm³
Shrinkage rate	MD	ASTM D955	0.24 %
Water absorption rate	24hr	ASTM D570	0.050 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	M-Scale	ASTM D785	109

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top