Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Plenco 05350 (Compression) Plastics Engineering Co.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Plastics Engineering Co./Plenco 05350 (Compression) |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D256 | 14.5 J/m | |
| Impact strength of cantilever beam gap | ASTM D256 | 16 J/m |
| hardness | Test Condition | Test Method | Plastics Engineering Co./Plenco 05350 (Compression) |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 109 |
| Mechanical properties | Test Condition | Test Method | Plastics Engineering Co./Plenco 05350 (Compression) |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 0.30 % |
| tensile strength | ASTM D638 | 31.0 MPa | |
| compressive strength | ASTM D695 | 142 MPa | |
| Tensile modulus | ASTM D638 | 14800 MPa | |
| Flexural modulus | ASTM D790 | 13200 MPa | |
| bending strength | ASTM D790 | 63.1 MPa |
| flammability | Test Condition | Test Method | Plastics Engineering Co./Plenco 05350 (Compression) |
|---|---|---|---|
| Limiting Oxygen Index | ASTM D2863 | 41 % |
| physical property | Test Condition | Test Method | Plastics Engineering Co./Plenco 05350 (Compression) |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.24 % |
| Water absorption rate | 24hr | ASTM D570 | 0.050 % |
| Apparent density | ASTM D1895 | 0.92 g/cm³ | |
| density | ASTM D792 | 1.74 g/cm³ |
| Thermal performance | Test Condition | Test Method | Plastics Engineering Co./Plenco 05350 (Compression) |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 193 °C |
| Continuous use temperature | ASTM D794 | 249 °C | |
| Linear coefficient of thermal expansion | MD | ASTME831 | 3.2E-05 cm/cm/°C |
| thermal conductivity | 100°C | ASTMC177 | 1.9 W/m/K |
Contact Us
Get App
Top