ABS 注塑级
0
- Properties:Characteristicshigh rigidityhigh gloss
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | GB-1033 | 1.05 g/cm |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | GB-3682 | 1.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Aizo impact strength | GB-1843 | 20 KJ/m | |
| elongation | GB-1040 | 20 % | |
| bending strength | GB-9341 | 70 MPa | |
| Rockwell hardness | GB-9342 | R-109 | |
| GB-9341 | 2.4 103MPa | ||
| tensile strength | GB-1040 | 50 MPa | |
| Aizo impact strength | GB-1843 | 16 KJ/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | GB-1410 | 10 Ω |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| GB-1634 | 95 ℃ | ||
| Microcard softening point | GB-1633 | 104 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top