Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS 注塑级 Shunde Luhua
--
--
Characteristics, high rigidity, high gloss
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Shunde Luhua/注塑级 |
|---|---|---|---|
| melt mass-flow rate | GB-3682 | 1.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Shunde Luhua/注塑级 |
|---|---|---|---|
| tensile strength | GB-1040 | 50 MPa | |
| Rockwell hardness | GB-9342 | R-109 | |
| Impact strength of cantilever beam gap | 6.35mm | GB-1843 | 16 KJ/m |
| bending strength | GB-9341 | 70 MPa | |
| Impact strength of cantilever beam gap | 3.18mm | GB-1843 | 20 KJ/m |
| elongation | GB-1040 | 20 % | |
| Flexural modulus | GB-9341 | 2.4 103MPa |
| Electrical performance | Test Condition | Test Method | Shunde Luhua/注塑级 |
|---|---|---|---|
| Surface Resistivity | GB-1410 | 10 Ω |
| physical property | Test Condition | Test Method | Shunde Luhua/注塑级 |
|---|---|---|---|
| density | GB-1033 | 1.05 g/cm |
| Thermal performance | Test Condition | Test Method | Shunde Luhua/注塑级 |
|---|---|---|---|
| vicat | GB-1633 | 104 ℃ | |
| Heat distortion temperature | 4.6Mpa，HDT | GB-1634 | 95 ℃ |
Contact Us
Get App
Top