PPC LEXAN™ 4795R resin
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.20 g/cm³ | |
| ISO1183 | 1.20 g/cm³ | ||
| melt mass-flow rate | ASTMD1238 | 15 g/10min | |
| Shrinkage rate | 内部方法 | 0.970.97 % | |
| 内部方法 | 0.970.97 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 2170 MPa | |
| tensile strength | Yield | ASTMD638 | 68.0 MPa |
| Break | ASTMD638 | 70.0 MPa | |
| elongation | Yield | ASTMD638 | 7.5 % |
| Break | ASTMD638 | 120 % | |
| Flexural modulus | ASTMD790 | 2210 MPa | |
| bending strength | ASTMD790 | 105 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 580 J/m | |
| ASTMD4812 | 2100 J/m | ||
| Dart impact equipped with measuring instruments | ASTMD3763 | 73.0 J | |
| ASTMD3763 | 77.0 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 160 °C | ||
| ASTMD648 | 147 °C | ||
| vicat | ASTMD15255 | 164 °C | |
| BallPressure Test | IEC60695-10-2 | Pass |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top