Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPC LEXAN™ 4795R resin SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC/LEXAN™ 4795R resin |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 580 J/m |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 77.0 J |
| Impact strength of cantilever beam gap | 23°C | ASTM D4812 | 2100 J/m |
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 73.0 J |
| Mechanical properties | Test Condition | Test Method | SABIC/LEXAN™ 4795R resin |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 120 % |
| 屈服 | ASTM D638 | 7.5 % | |
| Tensile modulus | ASTM D638 | 2170 MPa | |
| tensile strength | 断裂 | ASTM D638 | 70.0 MPa |
| 屈服 | ASTM D638 | 68.0 MPa | |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 2210 MPa |
| bending strength | 断裂,50.0mm跨距 | ASTM D790 | 105 MPa |
| physical property | Test Condition | Test Method | SABIC/LEXAN™ 4795R resin |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.970.97 % |
| TD：3.20mm | 内部方法 | 0.970.97 % | |
| density | ASTM D792 | 1.20 g/cm³ | |
| ISO 1183 | 1.20 g/cm³ | ||
| melt mass-flow rate | 330°C/2.16kg | ASTM D1238 | 15 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC/LEXAN™ 4795R resin |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 160 °C |
| vicat | ASTM D15255 | 164 °C | |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 147 °C |
| ball-indentation hardness | 125°C | IEC 60695-10-2 | Pass |
Contact Us
Get App
Top